PRODUCTION PROCESS
From placing the order to production, we only need 7-10 days to complete order, and 1-2 days to provide samples before batch order. The following paper shelf stand production process can help you better understand the production process of the cardboard floor display stand. From the display design to the final production can be completed in our factory, One stop retail display solution from display design to production.\
DESIGN SERVICE
Retail POS Display Solution Brand GRAPHIC DESIGN
7 Graphic designers will take you from your creative display concept, to conceptual renderings, to the final products. Our goal is to create superior promotion graphics. Our technical expertise of our production capabilities, coupled with our creative talents, gives you the very best of both worlds
Corrugated Cardboard Display Stand STRUCTURAL DESIGN
Work with our experienced retail product packaging engineers to produce the best corrugated and cardboard retail store packaging solution for your products display at supermarket. From corrugated packaging to cardboard promotional display boxes, our packaging design team can help you enhance your brand and sell more at retail with custom primary packaging. Let us help you design the perfect creative retail packaging solution for you.
Let's tried how was our good design service
The steps below will help you or your Graphic Designer in submitting your artwork to our Design Department.
♦ We use the latest versions of Adobe Illustrator, Photoshop, CImpack, and CorelDraw for our design. Vector formats (.ai or pdf. cdr) files are preferred.
♦ If you have images, please include all original source image files from Photoshop or other programs, including original layered Photoshop files. These will be necessary if modifications are needed or there are problems with the file.Photoshop files should be saved at 100% size at minimum 150-300 pixels per inch resolution. Image mode should be CMYK.
♦ Clean up files before sending. Eliminate all unused graphic elements and colors.Wherever possible, delete objects instead of hiding them in a mask or unused layer. Avoid multiple masks.
♦ Flexo printing on corrugated requires custom trapping and file adjustments. For this reason we prefer all files to be send as Illustrator files. Do not use transparency or other special effects within Illustrator. Identify all colors used in the file. Keep all layers in the file and do not flatten. Files should be sent at 100% of final size.
♦ All fonts should be converted to outlines. Various font formats could generate inconsistencies.
♦ Try to avoid using typefaces with fine lines and serifs. These tend to fill in when printed. If used, they may require manipulation to facilitate printing. These will be evaluated when a proof is received. The following minimum requirements apply:
♢ Minimum type size: 8pt positive, 10pt reverse
♢ Minimum size for ©®™: 3mm positive, 4mm reverse
♢ Line thickness: 1pt positive, 3pt reverse
♦ If an approved dieline has been supplied by BOXMaster, please ensure that the artwork is created on the PRINT SIDE of the dieline. Most dielines are created showing the INSIDE VIEW. Simply flip the dieline over to work on the print side view.
Do not apply any trapping to your job. This will be done according to press specifications.
♦ All disk files must be accompanied by a colour hard copy of the file on the disk (this can be a reduced proof). Email and internet transfers should include a PDF proof.
♦ If PDF files are being submitted as artwork, do not use any security. All fonts must be outlined.